Our 5.6″ LCD monitor reversing system Is our best selling reversing system. The LCD monitor can be connected to either one or two rear view cameras. You can switch between the two cameras by either pressing the ‘cam select’ button on the monitor, or it can be wired to switch between cameras automatically when you reverse gear.
This monitor can operate on 12V or 24V vehicles and has high and low voltage protection and also short circuit protection. You also have a choice of fixing method with this system – you get a dashboard monitor stand and a flush mount monitor frame included in the kit.
Monitor
5.6″ TFT LCD monitor: 4:3
Wide view angle (CR ->10): (up/down): 45 / 65, (left/right): 65/65
High brightness (cd/m2): 200
Contrast ratio: 300
Resolution: 224640 (pixels)
Mirror/Normal switch
Menu is workable even if under mirror image condition
Day/night sensor for automatic adjustment
Built-in speaker
Colour system: PAL/NTSC (auto)
Power requirement: 12/24V DC
Power consumption: <7W
Operating temperature: -20°C to +70°C
Storage temperature: -30°C to +80°C
Dimensions (L x W x D): 159 x 115 x 26.5mm
Weight approx: (including monitor stand) 528g
Camera
Resolution (pixels): PAL: 500(H) * 582(V), NTSC: 510(H) * 492(V)
Image size: 1/4 inch
Lens: 2.6 mm, F2.0
Lens angle: 110 degrees (diagonal)
Waterproof and dust resistance: IP68
9pcs LED’s for night vision (6-8m)
Horizontal resolution: 420TV line
Signal to noise ratio: 48dB
Power supply: DC12V
Power consumption: <1.5W
Operating temperature range: -30°C to +70°C
Storage temperature range: -40°C to + 80°C
Dimension (L x W x D): 65 x 94 x 63mm
Weight: 175 g
